Precision Mold & Die
Name Automobile headlight strip testing piece
Material S136(HRC52)
Machine JDGR400_A13S
Size 190×25×80mm
Advantages

1、The too large ratio of small tools’ length to diameter is solved by 5-axis machining ;
2、R0.1 ball-end cutting tool can machining for 44.5 hours continuously and steadily;
3、Good consistency of cutter mark and clear edges.

Name Optical lamp mold testing piece
Material S136(HRC52)
Machine JDHGT600_A13S
Size 85×85×50mm
Advantages

1、Surface deviation<0.0050mm;
2、The surface roughness Ra<0.070μm;
3、Clear intersection curve;
4、On-machine measurement and intelligent modification technology is applied to control the machining allowance;
5、On-machine measuring finished workpiece ensures one-time success rate.

Name Stamping die testing piece
Material SKD11(HRC62)
Machine JDCT600T_A15SH
Size 270×270×59mm
Advantages

1、Dimensional deviation<0.010mm;
2、With high consistency of surface effect, the surface roughness Ra<0.150μm;
3、R3 ball-end cutting tool can machining for 16 hours continuously and steadily;
4、On-machine measurement and intelligent modification technology is applied to control the machining allowance;
5、On-machine measuring finished workpiece ensures one-time success rate.

Name Graphite hot bending cavity plate testing piece
Material Graphite(Sigri 8650)
Machine JDPCT600_A10SH_SMD
Size 180×120×18mm
Advantages

1、Deviation of the mold’s forming surface ≤0.007mm;
2、Without wire drawing on the surface,the surface roughness Sa≤0.65μm;
3、On-machine measurement and intelligent modification technology is applied to control the machining allowance.

Name Needle mold testing piece
Material Torlon
Machine JDHGT400_A8
Size 60.7×26×5.5mm
Advantages

1、Compound machining of milling and drilling;
2、With the ratio of length to diameter 15:1, the precision of holes’ diameter is ±0.005mm;
3、The precision of center distance between holes is ±0.005mm;
4、One bit can drill 2000 holes continuously with invisible burrs to the eyes.

Name Aircraft propeller mold testing piece
Material S136(HRC52)
Machine JDHGT600_A13S
Size 220×150×58mm
Advantages

1、There is no trace between the vertical wall of the inner cavity and the bottom surface;
2、The surface roughness of inner cavity Ra<0.150μm;
3、3D surface deviation <0.010mm;
4、On-machine measurement and intelligent modification technology is applied to control the machining allowance;
5、On-machine measuring finished workpiece ensures one-time success rate.

Name Automobile headlight strip testing piece
Material S136(HRC52)
Machine JDGR400_A13S
Size 190×25×80mm
Advantages

1、The too large ratio of small tools’ length to diameter is solved by 5-axis machining ;
2、R0.1 ball-end cutting tool can machining for 44.5 hours continuously and steadily;
3、Good consistency of cutter mark and clear edges.

Name Optical lamp mold testing piece
Material S136(HRC52)
Machine JDHGT600_A13S
Size 85×85×50mm
Advantages

1、Surface deviation<0.0050mm;
2、The surface roughness Ra<0.070μm;
3、Clear intersection curve;
4、On-machine measurement and intelligent modification technology is applied to control the machining allowance;
5、On-machine measuring finished workpiece ensures one-time success rate.

Name Stamping die testing piece
Material SKD11(HRC62)
Machine JDCT600T_A15SH
Size 270×270×59mm
Advantages

1、Dimensional deviation<0.010mm;
2、With high consistency of surface effect, the surface roughness Ra<0.150μm;
3、R3 ball-end cutting tool can machining for 16 hours continuously and steadily;
4、On-machine measurement and intelligent modification technology is applied to control the machining allowance;
5、On-machine measuring finished workpiece ensures one-time success rate.

Name Graphite hot bending cavity plate testing piece
Material Graphite(Sigri 8650)
Machine JDPCT600_A10SH_SMD
Size 180×120×18mm
Advantages

1、Deviation of the mold’s forming surface ≤0.007mm;
2、Without wire drawing on the surface,the surface roughness Sa≤0.65μm;
3、On-machine measurement and intelligent modification technology is applied to control the machining allowance.

Name Needle mold testing piece
Material Torlon
Machine JDHGT400_A8
Size 60.7×26×5.5mm
Advantages

1、Compound machining of milling and drilling;
2、With the ratio of length to diameter 15:1, the precision of holes’ diameter is ±0.005mm;
3、The precision of center distance between holes is ±0.005mm;
4、One bit can drill 2000 holes continuously with invisible burrs to the eyes.

Name Aircraft propeller mold testing piece
Material S136(HRC52)
Machine JDHGT600_A13S
Size 220×150×58mm
Advantages

1、There is no trace between the vertical wall of the inner cavity and the bottom surface;
2、The surface roughness of inner cavity Ra<0.150μm;
3、3D surface deviation <0.010mm;
4、On-machine measurement and intelligent modification technology is applied to control the machining allowance;
5、On-machine measuring finished workpiece ensures one-time success rate.

Stamping die
Deep cavity die
Lamp cover mold
Cheetah injection mold
Optical mold
Automobile headlight strip mold