1、0.1μ feed, 1μ cutting;
2、Step with a height difference of 0.001mm and clear joint trace can be machined;
3、With high gloss, the surface roughness Sa≤0.005μm.

1、5-axis machining at one time, verticality and dimensional tolerancesare ±0.010mm;
2、With compound machining of milling and grinding, the surface roughness Sa＜0.200μm;
3、On-machine measurement and intelligent modification technology is applied to control the machining allowance and ensure one-time success rate.

1、The cutter mark is uniform under 100 times magnifier;
2、Surface roughness Sa ≤0.005μm;
3、Profile deviation ≤0.005mm;
4、On-machine measurement and intelligent modification technology is applied to control the machining allowance of each process.

1、One-time clamping and multi-position machining can be finished by 5-axis precision high-speed machining center;
2、Compound machining of milling, drilling, tapping and boring;
3、Coaxality deviation＜0.010mm;
4、On-machine measurement and intelligent modification technology is applied to control the machining allowance of each process and ensure one-time success.

1、Compound machining of drilling, boring and milling;
2、The largest ratio of cutting tools’ length to diameter is 14:1, and holes’ parallelism is 0.020mm;
3、Surface roughness Ra＜0.030μm, and inner surface roughness of holes Ra＜0.200μm;
4、On-machine measurement and intelligent modification technology is applied to control production process and achieve continuous and stable production.

1、Compound machining of boring, milling, drilling, tapping and reaming;
2、Parallelism of upper and lower reference planes ＜10μm,and surface roughness Ra＜0.400μm;
3、The largest diameter is 80mm while depth is 50mm, dimensional accuracy ＜20μm, and the verticality of relative reference planes is 10μm;
4、On-machine measurement and intelligent modification technology is applied to control production process and achieve continuous and stable production.